Highlights The IP66 laser enclosures are made for typical MV-Laser with 19/20mm diameter. It is available in three length from 120 to 180mm. The special mounting ring holding the laser inside the enclosure and ensures good heat dissipation. It allows flexible positioning and rotation – important for laser line adjustment. An enclosure extension is available … Continued
Highlights The housing series offers protection for cameras with a sideways viewing direction. The Chameleon S series is available with or without lens tube. This allows the use of cameras with compact C-mount lenses. Inbuilt LEDs can usually be used if the distance to the front window is not too large. The same counts for … Continued
Highlights Originally developed for under-water TV productions, the new Nautilus has been improved even further. Featuring the same dimensions as the Orca M, every critical component like enclosure lids, front window or cable gland is fitted with a double seal. This means even if one seal fails, the camera is still reliably protected. The purpose … Continued
Highlights The IP67 Orca enclosure series offers protection for larger cameras of up to 62 x 62mm cross section (for instance Sick Ranger, AVT Prosilica range, Basler Runner, Flir A300 etc.). Smaller cameras also fit into the Orca with special adapter plates, if a large ring light or lens requires more room. It is available … Continued
Highlights On the outside, the Gecko enclosure features the same dimensions as the Salamander. Due to the thinner wall however it offers slightly more room for cameras that just do not fit into the Salamander range. The Gecko is currently used for Vision Components VC4XXX and the Flir ax5 thermal imaging cameras (with Germanium windows). … Continued
Highlights The Feuersalamander series is especially designed for use in hygienically demanding applications such as the pharmaceutical and food industry. The protective housing is suitable for compact cameras from 47×29 to 40x40mm cross-section and provide IP66 and IP67 protection with excellent heat dissipation. The enclosure is made from electro-polished, especially corrosion-resistant surgical stainless steel (AISI … Continued
Highlights Thanks to its cylindrical inner shape the Salamander provides space to accommodate cameras of 29 x 47mm to 40 x 40mm cross section. The series is available in four lengths and adapts so easily to the total length of camera, lens and plugs. Optionally, it can be further expanded with a housing extension. The … Continued
Highlights The Colibri housing is suitable for small cameras with 29 x 29mm or 30 x 30mm cross section and lenses up to 39mm diameter. With just 50 x 50mm (w x h) and 181mm, or 211mm overall length is only slightly larger than the protected camera with lens and port. You can insert a … Continued
