Highlights The use of cameras in extreme areas can sometimes require the use of special windows. Whether Germanium for thermal imagers, plastic windows or heat mirror, for the majority of possible specific cases is a solution ready yet. Window Types Surcharge for Schott heat-absorbing 2“ glass for Salamander and Orca front lid Surcharge for 2“ … Continued
Highlights autoVimation offers a variety of options and enhancements to the daily work and to facilitate the handling of the camera components. The housing extensions allow to decrease the simplified setting of aperture and focus, and lens or filter change. The mounting blocks are robust and inexpensive camera mounts. It is perfect for all applications … Continued
Highlights Angles are used to connect dovetail profiles and enclosures vertically or in a 45° angle. Angles are also used to build machine-frames or conveyor-belt bridges holding camera and laser enclosures. Features/Options
Highlights If cameras are used under ambient temperatures of about 45°C, active cooling will be usually required. The Turtle series is particularly suitable for outdoor applications, e.g. suitable in the solar industry, because the Peltier climate control requires only a power supply, which can even be powered by photo-voltaics. These enclosures have been used successfully … Continued
Highlights The IP66 laser enclosures are made for typical MV-Laser with 19/20mm diameter. It is available in three length from 120 to 180mm. The special mounting ring holding the laser inside the enclosure and ensures good heat dissipation. It allows flexible positioning and rotation – important for laser line adjustment. An enclosure extension is available … Continued
Highlights The housing series offers protection for cameras with a sideways viewing direction. The Chameleon S series is available with or without lens tube. This allows the use of cameras with compact C-mount lenses. Inbuilt LEDs can usually be used if the distance to the front window is not too large. The same counts for … Continued
Highlights Originally developed for under-water TV productions, the new Nautilus has been improved even further. Featuring the same dimensions as the Orca M, every critical component like enclosure lids, front window or cable gland is fitted with a double seal. This means even if one seal fails, the camera is still reliably protected. The purpose … Continued
Highlights The IP67 Orca enclosure series offers protection for larger cameras of up to 62 x 62mm cross section (for instance Sick Ranger, AVT Prosilica range, Basler Runner, Flir A300 etc.). Smaller cameras also fit into the Orca with special adapter plates, if a large ring light or lens requires more room. It is available … Continued
Highlights Mounting brackets allow precise and vibration-proof mounting of dovetail enclosures to adapter-plates or to dovetail profiles. Combining several mounting brackets can meet any adjustment requirements of a camera system. The mounting kits show just a few possible mounting examples. Features/Options
Highlights On the outside, the Gecko enclosure features the same dimensions as the Salamander. Due to the thinner wall however it offers slightly more room for cameras that just do not fit into the Salamander range. The Gecko is currently used for Vision Components VC4XXX and the Flir ax5 thermal imaging cameras (with Germanium windows). … Continued
