Key Features This product is a ball only that can be used with a 1/2” NPT threaded pipe to acquire any length necessary. The imperial ball size fits our standard series AFSB-2, AFSB-290, and AFSB-2-2XS. The metric ball fits our standard series SLM-2, SLM-290, and SLM-2-2XS.
Key Features When ergonomics are important there is no better way to put a cycle start button on a machine. With threaded M30 x 1.5 and room for the cable connection inside, these are designed to protect the button from damage. Use them once and you will never go back to a square bracket. The … Continued
Highlights The Computar Thermal TH17V3511-34 35mm Zinc Sulfide specialty lens Computar Thermal TH17V3511-34 Cost-effective lens for high volume application Designed for uncooled IR sensors Optimized for the 8-12μm wavelength range
Highlights The Computar Thermal TH17V1810-34 18.8mm Zinc Sulfide specialty lens Computar Thermal TH17V1810-34 Cost effective lens for high volume application Designed for uncooled IR sensors Suitable for use under 24° FOV Optimized for the 8-12μm wavelength range
Highlights The Computar Thermal TH17V1311-34 13mm Zinc Sulfide specialty lens Computar Thermal TH17V1311-34 Cost-effective lens for high volume application Designed for uncooled IR sensors Optimized for the 8-12μm wavelength range
Key Features The Metric 4MM T-handle wrench is used to mount the SLM Standard and XS series Ball Base to all of the metric plates as well as used for the SLM Standard and XS series knuckles
Key Features The 5/32 T-Handle wrench is use for the screws in all of the knuckles in both the standard series and XS series (AFSB-2, AFSB-290, AFSB-2XS, AFSB-2XS90, and AFSB-2-2XS) as well as the AFSB-1XS Ball Base mounting to the XS series mounting plates.
Key Features The 3/16 T-Handle wrench is used on the standard series to mount the AFSB-1 Ball Base to all of the standard series plates.
Key Features The SLM-CLAMP HANDLE kit can be used in the Metric Standard and XS series knuckles (SLM-2, SLM-290, SLM-2XS, SLM-2XS90, and the SLM-2-2XS coupler) to make quick adjustments in the positioning of the arms. Remove one of the screws of the knuckle and add the spacer and handle. Once the position is set, tighten … Continued
Key Features The AFSB-CLAMP HANDLE kit can be used in the Imperial Standard and XS series knuckles (AFSB-2, AFSB-290, AFSB-2XS, AFSB-2XS90, and the AFSB-2-2XS coupler) to make quick adjustments in the positioning of the arms. Remove one of the screws of the knuckle and add the spacer and handle. Once the position is set, tighten … Continued
