Conveyors (General Parts)

Description: Roller Axle Idle End for 9.0″ Wide Conveyor

Description: Roller Axle Idle End for 7.5″ Wide Conveyor

Description: Roller Axle Idle End for 6.0″ Wide Conveyor

Description: Roller Axle Idle End for 4.5″ Wide Conveyor

Description: Roller Axle Idle End for 3.0″ Wide Conveyor

Description: Roller Axle Idle End for 1.5″ Wide Conveyor

Description: Conveyor rollers are 1,5″ wide and can be stacked to make conveyor widths of 1.5″, 3.0″, 4.5″, 6.0″, 7.5″, and 9″ wide conveyors. Rollers can be used for drive and idle ends. Rollers feature a 6MM centered V belt driver for both drive and belt tracking. This V belt aligns with the T-slot in … Continued

Description: Tension Block – Use this block at the idle end to give precise belt tension adjustment. Use this in conjunction with the AFC-1 bearing blocks. This block attaches into the extrusion T-slot with included fasteners. The included tension adjustment screw can be turned with a standard open end wrench.

Description: The Stand Lock Plate attaches to the end of the 3.0″ square stand base extrusion end tapped holes. The 1.5″ square adjustable stand extrusion orients at a 45 degree angle to fit inside the 3.0″ square extrusion. Included with this plate is the handle kit to lock the adjusting extrusion and easily set the … Continued

Description: The Stand Guide attaches to the bottom of the 1.5″ square extrusion used in making a stand. This block provides additional lateral support when the extrusion is inside 3.0″ stand base extrusion. Mounting bolt is included.