Vivid Engineering CLT-371 Translator
Highlights
**Due to the worldwide chip crisis, this product is currently unavailable at this time.**
The Vivid Engineering CLT-371 translator converts CameraLink to HD-SDI, enabling the use of CameraLink cameras with HD-SDI monitors and other equipment. The CLT-371 works with most color and monochrome base-configuration cameras. HD-SDI output is either 1920×1080 or 1280×720. Features include automatic frame rate adaptation, Bayer white balance correction, camera synchronization support, and an RS-232 port for camera set-up and control. The Vivid Engineering CLT-371 translator supports PoCL cameras and HDMI / DVI-D output using external adapters. No special software or programming is required, CLT-371 configuration is via rear-panel switch settings. The Vivid Engineering CLT-371 translator is housed in a sturdy aluminum enclosure, supports CameraLink to HDMI, and CameraLink to DVI via an inexpensive external adapter, connects to cameras with mini connector via adapting cables, & connects to PoCL cameras via the CLR-102 repeater/adapter! The Vivid Engineering CLT-371 Translator is designed to work with most CameraLink base configuration cameras. A “base” configuration camera can be identified by the existence of just one CameraLink connector. The CLT-371 incorporates the standard CameraLink “MDR” (i.e. full size). A standard CameraLink cable is used to connect the camera to the CLT-371. Cameras with the “mini” (i.e. HDR/SDR) CameraLink connector are connected to the CLT-371 using readily-available adapting cables with and MDR connector on one end and an HDR/SDR on the other.
Features
- Enables use of CameraLink cameras with HD-SDI monitors and equipment (HDMI & DVI-D output via an inexpensive external converter)
- Works with most CameraLink color and monochrome base-configuration cameras (PoCL cameras supported using Vivid CLR-102 adapter)
- HD-SDI 1920×1080 @ 29.97p or 30p, 1280×720 @ 59.94p or 60p
- Automatic frame rate adaptation; no camera synchronization required
- Bayer white balance correction
- Crop and center for images larger/smaller than 1920×1080 or 1280×720
- RS-232 port for camera set-up and control
- Configured via rear-panel switches, no special software or programming required
- Camera synchronization support
- Test pattern generator
- Camera presence and synchronization indicators
- Multi-nation power supply included, locking-plug version optional
- Sturdy aluminum enclosure w/ mounting flange
- 3-year warranty