Basler dart M dmA3536-9gc Camera

Highlights

The Basler dart M dmA3536-9gc is a compact color board level GigE area scan camera designed for machine vision and embedded imaging applications requiring high sensitivity in visible and near-infrared wavelengths. Featuring the Sony IMX676 STARVIS 2 CMOS rolling shutter sensor, the dmA3536-9gc delivers 12.5 MP resolution at 3536 x 3536 pixels with a frame rate of up to 9 fps.

With 2.0 µm pixels, a 1/1.6″ sensor format, and high sensitivity in both visible and NIR wavelengths, the dmA3536-9gc combines detailed color imaging with a compact 27 mm board level design. Its Sony STARVIS 2 sensor technology, low-light performance, flexible triggering, modular interface architecture, and Basler pylon support make it well suited for industrial inspection, intelligent transportation, logistics, low-light imaging, robotics, NIR-assisted inspection, and embedded machine vision systems.

Features

• Sony IMX676 STARVIS 2 CMOS sensor provides high-sensitivity 12.5 MP color imaging for industrial and embedded vision applications.
• 3536 x 3536 resolution provides a square image format for detailed inspection, measurement, detection, and positioning tasks.
• Up to 9 fps provides high-resolution image acquisition through the GigE interface.
• Rolling shutter sensor combines high resolution and sensitivity with cost-effective Sony STARVIS 2 sensor technology.
• Visible + NIR sensitivity supports imaging in conventional visible light as well as near-infrared applications.
• High NIR sensitivity provides approximately 45% quantum efficiency at 850 nm and approximately 20% at 950 nm.
• GigE interface provides standard Ethernet connectivity for industrial machine vision system integration.
• 2.0 µm x 2.0 µm pixels support high spatial resolution within a compact sensor format.
• 1/1.6″ sensor format supports compact optical configurations and flexible lens selection.
• Color output supports inspection and identification tasks where color differentiation is required.
• Compact board level design measures approximately 27 mm x 27 mm for integration into space-constrained systems.
• Hardware trigger, software trigger, and free-run operation provide flexible acquisition and synchronization options.
• GenICam, GigE Vision, and Basler pylon support simplify camera configuration, image acquisition, and system integration.

Applications

• Industrial inspection
• Low-light machine vision
• Near-infrared imaging
• Intelligent transportation systems
• Logistics automation
• Robotics and automation
• Color inspection and verification
• Machine vision alignment and positioning
• Quality control
• Embedded machine vision