-
Form Factor
PCI Express card
-
Format
Standard profile, half-length, 1-lane PCI Express card
-
Dimensions
L 167.65 mm x H 111.15 mm | L 6.6 in x H 4.38 in
-
Weight
135 g, 4.76 oz
-
Standard
PCI Express 1.0
-
Link Width
1 lane
-
Link Speed
2.5 GT/s (PCIe 1.0)
-
DMA
32-bit
-
Peak Delivery Bandwidth
256 MB/s
-
Effective (Sustained) Delivery Bandwidth
180 MB/s (Host PC motherboard dependent)
-
Power Consumption
Typ. 8.3 W (940 mA @ +3.3V, 430 mA @ +12V), excluding I/O power output
-
Interface Standard(s)
Non-standard Analog
-
Connectors (Camera/Video Input)
CAMERAS: high-density sub-D 44-pin male connector for video and camera control | Internal video: 10-pin shrouded header video connector on the PCB
-
Termination Resistor
Selectable by software
-
Number of Cameras
Four single-tap cameras
-
Number of Cameras (at Full Frame Rate)
4
-
Line-Scan Cameras Supported
No
-
A/D Converter
Four, 10-bit, 65 MHz
-
Maximum Camera Line Rate
52.5 kHz
-
On-Board Memory
64 MB (32 MB for image data)
-
Input LUT (Lookup Table)
4 x 8- or 10-bit LUT
-
Number of Lines
32 I/O lines: 4 contact inputs (Factory I/O: IN); 12 relay outputs (Factory I/O: OUT); 4 TTL inputs/outputs (System: IO); 4 differential inputs (System: TR); 4 opto-isolated outputs (System: ST); 4 full-duplex serial com ports (Camera COM: RX/TX)
-
Connectors (General Purpose)
EXTERNAL SYSTEM: 26-pin high-density male sub-D connector on the bracket | INTERNAL SYSTEM: 26-pin dual-row 0.1" shrouded header on the PCB | FACTORY I/O: 34-pin dual-row 0.1" shrouded header on the PCB | CAMERA COM: 16-pin dual-row 0.1" shrouded header on the PCB | Molex 4-pin connector on the PCB for powering cameras
-
Usage
Camera and image acquisition trigger | Light strobe trigger | General purpose IO
-
Electrical Specifications
TR: Inputs compatible with TTL, LVTTL, differential LVDS, differential RS-422, differential RS-485 signals, protected against electrostatic discharge, with choke for the rejection of common-mode noise | ST: Opto-isolated outputs, compatible with signals up to 60V, with 3 μs fall time, isolated up to 500V | IO: Inputs or outputs compatible with TTL signals, protected against electrostatic discharge, with high-frequency noise filter | IN: Polarity-free inputs, compatible with TTL, 12V and 24V signals, opto-couplers, relays and switches | OUT: Opto-isolated potential-free and polarity-free solid-state outputs, compatible with signals up to 30V, with 4 μs fall time, isolated up to 500V | COM: RS232 asynchronous serial communication lines to control the cameras (exposed to the OS as standard COM ports)
-
Host PC Operating System
Microsoft Windows 10, 8.1, 8, 7 for x86 (32-bit) and x86-64 (64-bit) processor architectures | Linux, from kernel version 2.6 to 4.13, compatible with a wide range of distributions, for x86 (32-bit) and x86-64 (64-bit) processor architectures
-
APIs
MultiCam 32- and 64-bit binary libraries (Windows and Linux), for ISO-compliant C/C++ compilers
-
Operating Ambient Air Temperature
0 to +50 °C / +32 to +122 °F
-
Operating Ambient Air Humidity
10 to 90% RH non-condensing
-
Storage Ambient Air Temperature
-20 to +70 °C / -4 to +158 °F
-
Storage Ambient Air Humidity
10 to 90% RH non-condensing